Simulate Rain Environment Test Chamber ULB-E27
- Ulabester
- China
- About 30 days
- 500 sets
1. The internal or external shell is made of stainless steel, large areas visual window.
2. Sample shelf (stainless steel disk inside the chamber), 1~30r/in, can be adjusted.
3. Import variable frequency speed controller.
4. Temperature cab be 0.5~0.76Mpa when high pressure spray.
5. Rain test chambers with water pressure and flow rate adjustable. The rain test chamber is suitable for external lighting & signal devices & automotive lamp shell protection test.
6. Inner case’s material is imported steel plates, Shell is made of #304 stainless steel. Water tank uses SUS304 stainless steel, which was installed on side of test devices. The capacity of tank could meet test water.
Cheap Simulate Rain Environment Test Chamber, Buy rain chamber, rain spray test chamber, rain test chamber price
Rain Test Chamber is designed according with the standards of IEC 60529-2001 and mainly used for electronic products to do the waterproof test. Such us mobile phones parts, LED, lighting & signal devices, automotive lamp and exterior parts testing work.
Water pump for rain test chambers uses highly pressure stainless steel pump, ensure water pressure and flow of the test cycle, the pump is installed in the side of the IP test device, and both ends of the inlet and outlet to set up the joint, easy to replace and repair. Water tank can be disassembled,The corresponding joint or hose connection is arranged in the water pipe connection.
Key Specification | |
Model | ULB-E27 |
Inner dimension | RT+5℃~85℃, can be adjusted (state when ordering) |
Temperature of test chamber | 375 or 500mm |
Radius of water spray ring | Φ15mm |
Diameter of spray pipe | Φ0.4mm |
Spray aperture | 50mm |
Distance of spray aperture | 60, 90, 180degree, (Approximate) |
Swing of spray pipe | RT+5℃~85℃, can be adjusted (state when ordering) |
Rain chamber | |
Temperature of test chamber | RT+5℃~85℃, can be adjusted (state when ordering) |
Diameter of spray pipe | Φ15mm |
Spray aperture | Φ1.2mm |
Distance of spray aperture | 12.5mm |
Angle swing at the back | 360。(rotate) |