Salt Spray Corrosion Test Chamber ULB-E11
- Ulabester
- China
- About 30 days
- 500 sets
The whole equipment adopts material of 5mm import gray PVC sheet, Internal adopts advanced band produced three-dimensional reinforcement technology, with strong structure, no deformation, acid and alkali resistance, high temperature resistance, and no aging. It is applied to all kinds of test specifications such as salt spray, copper acetate, etc.
Heating method: test room adopts steam direct heating method, temperature rise fast and uniform, reduce the standby time, the heating tube is made from titanium tube with high corrosion resistance.
Laboratory commodity shelf uses plane dividing shelf, commodity shelf is the ￠10mm toughened glass rod with corrosion resistance. Plastic steel V type shelf and glass rod placing objects make sure the sample 30 degree bevel angle, the angle can be arbitrarily adjusted,the direction of spray falling around is the same as the direction of spay receiving, test piece is set with large quantity.
Sample supplement jar adopts hidden and water level perspective window attached, it is easy to clean and not easy cracking.
china Salt Spray Corrosion Test Chamber, Sales salt spray fog test, salt spray corrosion test Factory ULB-E11
Salt spray test: It aims at determining the product corrosion resistance after various kinds of materials surface suffering electroplating, anodizing, painting, rust-proof oil corrosion resistance treatment.
It is suitable for neutral salt spray test (NSS).
Standards:
CNS3627, 3885, 7669, 8886, JIS D-0201, H-8502, K-5400, Z-2371, ISO 3768, ASTM B-117, B-268, GB-T2423, DIN 50021-SS
Key Specification | |||||
Model | ULB-E11-1 | ULB-E11-2 | ULB-E11-3 | ULB-E11-4 | ULB-E11-5 |
Inside Chamber Dimension (WxDxH cm) | 60x45x40 | 90x60x50 | 120x100x50 | 160x100x50 | 200x120x60 |
Outside Chamber Dimension (WxDxH cm) | 107x60x118 | 141x88x128 | 190x130x140 | 230x140x140 | 270x150x150 |
Test Chamber Volume | 108L | 270L | 600L | 800L | 1440L |
Brine Tank | 15L | 25L | 40L | 40L | 40L |
Control Method | LED Meter | ||||
Plastic Plate Thickness | 5mm | ||||
Temperature of Test Chamber | Brine test method 35℃±1℃ | ||||
Temperature of Pressure Barrel | Brine test method 47℃±1℃ | ||||
Brine Temperature | 35℃~ 50℃ | ||||
Brine Concentration | 5% sodium chloride solution concentration) | ||||
Compressed Air Pressure | 1.00±0.01kgf/cm2 | ||||
Spray Volume | 1.0~2.0ml/80cm2/h(gather at least 16 hours, take its average) | ||||
Relative Temperature of Test Chamber | Above 85% | ||||
PH-value | Neutral: 6.5~7.2 | ||||
Spray Method | continuous spray or intermittent spray | ||||
Power Supply | AC220V1Φ10A | AC220V1Φ15A | AC220V1Φ30A | ||
Temperature Range | Laboratory temp. | 35℃- 50℃(can be arbitrarily set) | |||
Pressure barrel temp. | 47℃- 63℃(can be arbitrarily set) | ||||
Temperature Rising Speed | Laboratory | Room temperature →35℃ about 35 minutes | |||
Pressure barrel | Room temperature →47℃ about 15 minutes | ||||
Temp. accuracy | ±1℃ | ||||
