Hook and Loop Fastener Fatigue Tester ULB-FC03
- Ulabester
- China
- 10-30 days
- 500 sets
The Hook and Loop Fastener Fatigue Tester has the characteristics of beautiful appearance, simple and practical operation. Counter LCD display, can be preset, intuitive and convenient.
Application
The Hook and Loop Fastener Fatigue Tester is suitable for the repeated peeling and bonding fatigue test of Velcro tape.
Velcro Fatigue Tester Principle
The test principle of the hook and loop fastener repeated fatigue testing machine: the hook and loop fastener (velcro tape) is repeatedly peeled and pasted. After a certain number of times, the test piece is cut into a 75×20mm sample, and the roller itself is rolled. The weight of the sample is rolled to make it fit evenly, and then the adhesive force (AS) and adhesive strength (PA) are measured with a tensile testing machine. Sampling requirement: length is 520mm. Result judgment: observe the adhesive force and adhesive strength after repeated peeling and bonding.
Velcro Fatigue Tester Standards
DIN 3415, BS EN ISO 22776, BS EN ISO 22777 , SATRA TM123, GB/T3903.20, GB/T3903.21,GB/T 23315
Velcro Fatigue Tester Key Specification
Model | ULB-FC03 |
Control method | LCD Touch screen controlled |
Sample dimension | Length 540±10mm, width: 20~50mm |
Upper idling drum | Diameter 162.5±0.5mm |
Under driven drum | Diameter 160±0.5mm |
Drum width | 70mm |
Clamp slot | Width 4mm, length 55±2mm |
Test speed | 60±5r/min |
Reversal intervals | 30±5 s |
Test load | 1±0.1N/mm |
Test times | 5000 cycles |
Power supply | 1∮AC 220V 50/60HZ |
Dimensions( L x W x H ) | 55 cm ×45 cm ×65 cm |