How To Maintain The Box Compression Testing Machine
Box Compression Strength Tester with multi-function and high precision is designed to test the compressive strength of standard size corrugated box, or packages and containers made of other material with a compressive strength smaller than 100kN. With advanced mechanical structure of a pair of threaded shafts &guide pillars and imported motor for control, the testing machine has the following salient features： good parallelism, reliable measure precision and high return speed.
How to maintain the box compression testing machine
The Box Compression Tester will rust, precision error and other problems after a long time of use, which belong to the reason for not doing a good job of maintenance of the instrument.
Therefore, Ulabester sort out some of the carton compression testing machine maintenance methods for your reference.
Maintenance :
1. LCD Model Box Compression Strength Tester must use the specified power supply and correct grounding.
2. Use the fuse within the specified limit.
3. failure, the operator to check and eliminate, can not run with disease.
4. Lubricate all moving parts from time to time.
5. if the printing paper roll is used up or the handwriting is not clear, replace the printing paper roll or ribbon.
6. Properly add oil to the transmission chain. The oil should not be too much.
7. The two drive screw to maintain proper lubrication, lubricating oil with specified mechanical oil, refueling must be removed from the two columns at the opening of the dust cover.
8. The working environment is kept clean and hygienic.
9. In order to keep the machine in good technical condition, periodic verification is carried out.
Ulabester Since our foundation, we have been concentrated on the research and development of physical testing instruments. As a result, our products are compliant with ISO, ASTM, DIN, EN, BS, GB, JIS, ANSI, UL, TAPPI, AATCC, IEC, VDE, CSA as well as other standards, and they are preferred by both domestic and overseas customers .
