Button Pull Test Machine ULB-T02
- Ulabester
- China
- About 30 days
- 500 sets
Button Pull Test Machine YLB01 Configure Your Push/Pull Tester From A Wide Range Of Test Stands, Force Gauges, & Grips. button pull tester Consists of an upper snap clamp, a lower fabric clamp and force gauge mounted on a stand, a hand wheel on the bottom of snap tester which allows fine control with convenient operation.
Application:
The aim of Button Pull Test Machine is defined responsibility of garment manufacturer, make sure button, push-button and fixed accessories can fixed on garments suitable. To avoid button fall off garments & risk of infant eating. So, all the button, push-button & fixed accessories on garments must pass snap button strength test. This machine can do even and vertical tensile test of all kinds of buttons on garments. Test fastness degree of button reach relative security standard or not.
Feature:
1.snap button pull test machine is a simple but effective design mainly consisting of a high precision gauge, a sturdy required by standards & regulations is be fixed horizontally (constant force is applied to secure the sample) so that snap or other accessories attached in fabric can be clamped into.
2.Moreover, a standard weight is also offered so that it can be regularly checked if it meets the safety requirements.
3.The capability of the button pull test machine can be enhanced with clamps & accessories for testing of other Snaps, Jean Buttons, Four Hole Buttons & Garments Accessories such as Zippers, Bows, Appliqué, Toggles, Hooks/Bars, and D-Rings, amongst others.
Standards:
16 CFR 1500.51-53, ASTM PS79-96, D4846
Specification:
Dimensions | 26 x 31 x 82 cm |
Net Weight | 32kg |
Accessories:
Standard accessories | 1pc | IMADA Force Gauge FB-30K |
1pc | Upper Universal Grip | |
1pc | Upper Stud Grip | |
1pc | Lower Fabric Clamp & Level Arm Locking | |
1pc | Lower Grasp Button Accessory Kit | |
1pc | Calibration Weight 15LB | |
1pc | Three Pronged Grip | |
1pc | Upper Long Nose Vise Grip | |
Optional accessories
| Optional | Two Pronged Clamp |
Optional | Flat Clamp | |
Optional | Short - Mouth Clamp | |
Optional | Seam Clamp | |
Optional | Wide - Mouth Clamp | |
Optional | Multifunction Vise Clamp | |
Optional | ASTM Zipper Test Kit | |
Optional | Clamps for ASTM D4846 |